If the system boots and falls into “loader>” prompt. Do the following steps.
Step 1: Issue the command dir to check the directory and enter the command:
boot nxos.9.2.1.bin
Step 2: Once the switch is boot up, set password for Nexus 9K,
Step 3: Login to the switch.
How to prevent Nexus 9K
from dropping into “loader >” prompt
As soon as you set up your Cisco
Nexus 9000 (following set up of POAP interface), you need to configure the boot
image in your system to avoid dropping to the “loader >” prompt
after reload/shut down.
